Wind Measurer Alarm Controller PCE-WSAC 50

Wind Measurer Alarm Controller PCE-WSAC 50

PCE-WSAC 50 is an anemometer alarm controller that displays the current wind speed as well as the average wind speed for the last 2 and 5 minutes. A pre-alarm and a full alarm can be activated based on the preset values. Yes If the wind speed is higher than the preset values, a pre-alarm is triggered first before the full alarm is given.

Both alarms are issued optically and acoustically. When the pre-alarm is activated, a yellow LED flashes on the front of the device. and intermittently it beeps like a Warning sound. When the full alarm is activated, a red LED will flash on the front of the unit and a continuous beep will sound.

PCE-WSAC 50 makes it possible to measure the smallest movement of the wind. This anemometer alarm controller is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy, and manufacturing. A relay can also be used if required. connected to the controller.

Sensors are sold separately. for more information about this product please check the datasheet also to buy Wind Measurer please visit our website.

PCE-WSAC 50 Features

• Pre-alarm and full alarm with visual and audible warnings
• Allows measurement of the slightest wind movements
• Optional RS-485 Modbus interface for data communication
• Bright, easy-to-read LED display
• Simple to use
• Incl. ISO Calibration Certificate

Wind Measurer PCE-WSAC 50

• Power supply 115V AC 230V AC 24V DC
• Supply voltage for sensors (output) 12V DC 24V DC
• Measuring range 0 … 50 m/s or 0 … 110 mph
• Signal input (selectable) 4 … 20-mA 0 … 5 / 10V
• Alarm relay 2 NO/NC relays with max. load of 220V AC / 10 A
• Optional interface RS-485 Modbus
• Dimensions 197.5 x 90 x 45 mm / 7.7 x 3.5 x 1.7 in
• Weight Approx. 400 g / < 1 lb