Powerful Thermo Hygrometer PCE-HT 300

Thermo Hygrometer PCE-HT-300

The humidity meter PCE-HT 300 is a laboratory humidity meter for temperature, dew point, and humidity. The data logger saves the measurement data in 16 GB of internal memory in CSV format. The memory is read out by the humidity meter via the micro USB interface. The 7″ touchscreen of the humidity meter has two different display modes: A numeric display with pie charts and a reading display as a graph. In graph mode, temperature, dew point and-The HT 300 humidity meter can be attached to the back of the humidity meter, but it is also possible to operate this sensor with a humidity measuring device using a 200 cm long cable.

The humidity meter PCE-HT 300 is operated entirely via touchscreen. All settings can be easily made on the humidity meter. In addition to measuring and storing the measured values, the humidity meter can set an alarm if the measured values ​​are exceeded or not reached. The air humidity meter uses a lithium-ion battery as the energy source. This is charged via the USB socket with the help of the included power pack. The humidity meter can be operated on the rear stand of the table or the wall bracket on the wall.

Thermo Hygrometer PCE HT 300 Features

• 7″ touchscreen
• 16 GB of memory
• Storage as CSV
• Measures temperature, dew point, and humidity
• Micro USB interface
• Battery and mains operation

Thermo Hygrometer PCE-HT 300 Specifications:

• Measuring temperature range -10 … 80°C / 14 … 176°F
• Measuring dew point range -10 … 80°C / 14 … 176°F
• Measuring humidity range 0 … 100% RH
• Display 7″ touchscreen
• Storage 16 GB
• Storage format CSV
• Power supply 3000-mAh Li-Ion battery
• 5V / 2 A power supply
• Battery life About 5 years
• Dimension 180 x 115 x 18 mm / 7 x 4.5 x 0.7 in
• Weight About 450 g / 1 lb