-
Testo 465 tachometer
$ 362.16
PCE-IT 120 Insulation Tester
The PCE-IT 120 insulation measurement device can test insulation resistance up to a maximum of 8 GΩ, utilizing auxiliary voltages of 250, 500, and 1000V. Additionally, it features capabilities for measuring both DC and AC voltages up to 950V DC and 700V AC, respectively, and resistance up to 2 kΩ. The device also includes a continuity tester that emits a beep. Moreover, it allows for the assessment of the polarization index and the dielectric ratio.
The insulation tester’s OLED display allows for easy recording of measurements with just the press of a button. This device adheres to the standards set by DIN 57 411 part 1 / VDE 0411 part 1, which cover safety measures for electronic measuring instruments (IEC1010-1), and DIN VDE 0413 specific to insulation testers. It is calibrated at the factory and can be supplied with an ISO calibration certificate either when initially purchased or during periodic recertifications, such as annually.
PCE-IT 120 Key Features
- OLED display
- Automatic polarity display
- Automatic range selection
- Automatic zeroing
- Discharge beeper for insulation measurements
- Overload protection during continuity test
- Safety function, the voltage is held only 10 seconds (can be deactivated)
- Hold function
- PI and DAR test
PCE-IT 120 Specifications
| Measuring ranges | 2 GΩ / 250V |
| 4 GΩ / 500V | |
| 8 GΩ / 1000V | |
| ACV: 0 … 700V | |
| DCV: 0 … 950V | |
| Resistance / passage | 0.01 … 1999 Ω |
| Resolution | Isolation: 1/10/100 MΩ |
| ACV: 1V | |
| DCV: 1V | |
| Resistance / passage | 0.01 / 0.1 / 1 Ω |
| Accuracy | Isolation: ± 3% |
| ACV: ± 1.5% | |
| DCV: ± 1.5% | |
| Resistance / passage | ± 2.0% |
| DC test voltage | 250/500 / 1000V |
| Short circuit current | 1.1-mA |
| Display | 2-line 16-fold OLED display |
| Power supply | 8 x 1.5V AA battery |
| Dimensions | 175 x 85 x 75 mm / 6.9 x 3.3 x 3 in |
| Weight | About 655 g / 1.4 lbs |
| Environmental conditions | 0 … 40°C / 32 … 104°F |
| Storage conditions | -10 … 50°C / 14 … 122°F |
| Degree of protection / standardization | IEC 1010-1, 700V CAT III |
Related products
Megger Torkel 950 Battery Load Tester
Fluke 1777 Three-Phase Power Quality Analyzer
Fluke MDA-550 Series III Motor Drive Analyzer
Megger Digiphone+2 Shock Wave Receiver
Fluke 1775 Three-Phase Power Quality Analyzer
Megger Sverker650 Single-phase Relay Test Set
We are always at your doorstep with your favorite products
Contact Info
- Address: Alsabkha Bus Station, Deira, Dubai, UAE
- Phone: +971 56 583 2198
- Email: info@soonmart.com
