Fluke T130 Voltage and Continuity Electrical Tester

Fluke-T130 Two-pole Voltage and Continuity Electrical Tester

The Fluke T130 is an electrical tester designed to measure voltage and continuity in electrical circuits. It is a bipolar tester, which means it has two test leads that can be used to measure voltage between two points in a circuit or to check circuit continuity.

How do we test our new and improved Two-Pole Voltage and Continuity Testers?

Bipolar and continuity testers measure voltage, but it is equally important when a voltage tester tells you that there is NO voltage before working on the circuit. For you to trust your bipolar tester, it should be the most reliable and robust tester you can find. That’s what the redesigned fluke t130 voltage tester from Fluke gives you.

Fluke knows that cable assemblies often fail. The cable of any dipole voltage and continuity tester is its weakest point – it bends, twists, coils, and is subjected to repeated constant tension. If the cable breaks, it can put you at greater risk to your safety. Industry standards require cables to be tested to withstand a 45-degree bend and remain functional after 5000 bend cycles. Fluke required our testers to triple the standard, bending the cable 150 degrees in each direction. That’s why we can offer you our strongest voltage and continuity tester warranty.

fluke t130/vide Features

• Designed in accordance with IEC EN 61243-3:2014 to verify the absence of voltage – even when batteries are discharged
• CAT IV 600 V, CAT III 690 V safety rating
• Redesigned cable assembly for maximum reliability at work
• With 4 ways to indicate the presence of voltage – LED display, LCD display, audible tone, or tactile feedback – you always know if the dangerous voltage is present

T130 fluke Specifications:

• Voltage AC/DC:6V – 690V
• Continuity:0 – 400 kΩ
• Frequency:0 / 40 – 400 Hz
• Phase rotation:100 V – 690 V
• Response Time (LED indicator):< 0.5 s
• 200 kΩ input impedance: Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V
• 7k Ω input impedance (with load buttons pressed): Current draw 30 mA @ 230 V

Related Products

• Fluke T150
• Fluke T110
• fluke T90