The Extech EX613 is a 400 Amp dual input AC/DC Clamp meter with a built-in non-contact voltage detector. This TRMS AC/DC Clamp Meter has dual thermocouple inputs for T1, T2, and T1-T2 Differential Temperature measurements. This DMM measures AC/DC Voltage and Current, Resistance, Capacitance, and Frequency.
Additional features include a DC micro-amp function for flame rod measurements, a Diode open circuit voltage of 2.8 Volt, a Data Hold plus a fast Peak Hold for capturing current surges at motor startup, and capacitance measurement to 40mF.
Extech EX Series
EXTECH-EX613 Features
True RMS measurements for accurate AC Voltage and Current measurements
Dual-type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
Built-in non-contact Voltage detector with LED alert
DC µA multimeter function for HVAC flame rod Current measurements
Data Hold plus fast Peak Hold of current surges during motor startup
40,000-count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
Measures motor capacitors to 40,000µF
1.25″ (32mm) jaw opening for conductors up to 500MCM
A rugged double molded housing
Auto power off with audible alert and disable function
Autoranging with manual override
Complete with CAT III-600V, double molded test leads, 9V battery, two general purpose Type K bead wire probes, and case
EXTECH 400A Dual Input acdc Clamp Meter Specifications
AC/DC Current (Max Res.) 400.0A AC/DC (10mA)
Basic ACA accuracy ±1.5%
AC/DC Voltage (Max Res.) 600V (0.1mV)/600V (0.01mV)
DC µA Current (Max Res.) 4000µA (0.01µA)
Resistance (Max Res.) 40.000MΩ (0.01Ω)
Capacitance (Max Res.) 40mF (0.01nF)
Frequency (Max Res.) 40MHz (0.001Hz)
Temperature – Type K -58 to 1832°F (-50 to 1000°C)
Diode (2.8V)/ Continuity Yes
Duty Cycle 0.5 to 99.0%
Dimensions 9×3.1×1.9″ (229x80x49mm)
Weight 10.7oz (303g)
To check the full specifications of Extech EX613 visit the datasheet.
Share with Friends
Trading is more effective when you share products with friends!Share you link
Share to