Fluke 725 Multifunction Process Calibrator

Fluke 725 Multifunction Process Calibrator

With the Fluke 725 Multifunction Process Calibrator, you can quickly generate and measure almost any process parameter and test nearly every process device. Measure and deliver mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure with pressure modules.

As soon as you pick it up, the fluke 725 us multifunction process calibrator is ready to go as a powerful yet easy-to-use field calibrator. Its simple controls without menus make operation more accessible and the backlit display provides better visibility in poor conditions. bright. It features a small, streamlined shape and a rugged, reliable design that makes it ideal for withstanding harsh field conditions.

For more Fluke 725 Multifunction Process Calibrator Price contact us through MME. At MMElectronics, we strive to provide exceptional customer service. Our expert team is ready to assist you in selecting the best Calibrator for your application.

Fluke Process Calibrator Features

• Calibration of both temperature and pressure transmitters
• Measure/source/simulate mA loop parameters
• Measure and source mA, Volts DC, frequency, and resistance
• Built-in 24 V loop power supply
• Store and recall frequently used calibration setups

Versatile troubleshooting tool

Power transmitter during test using loop supply with simultaneous mA measurement so you can test a transmitter off-loop and better isolate problems. The 725 can also try a variety of RTD transmitters with fast pulses and PLCs (programmable logic controllers) with pulses as short as 10ms.

Source mA with simultaneous pressure measurement for valve and I/P tests (inlet current/outlet pressure) in a single device. You can also test flow meters with frequency and CPM (counts per minute) functions, and perform quick linearity tests with auto-stepping and auto-ramp functions to quickly check the mA signal at different output levels.

Frequently Asked Questions

What is Fluke-725 used for?

With the Fluke multifunction calibrator 725 fluke, you can quickly generate and measure almost any process parameter and test nearly every process device. Measure and deliver mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure with pressure modules.

What is a fluke calibrator used for?

Fluke’s multifunction calibrator process tools are designed to calibrate almost anything. These calibrators record, measure and simulate almost all process parameters, and the documented versions even document the results. this product is different from Fluke 725 ex.

more information fluke-725

to download Fluke 725 datasheet clicks on the datasheet tab also for Fluke 725 multifunction process calibrator price visit our website.

Fluke 725 specifications

• Ramp functions (Source functions): Voltage, current, resistance, frequency, temperature
• Ramp functions (Ramp ): Slow ramp, Fast ramp, 25% step-ramp
• Loop power function (Voltage): 24 V
• Loop power function (Maximum current): 22 mA, short circuit protected
• Step functions (Source functions ): Voltage, current, resistance, frequency, temperature
• Step functions (Steps): 25% of range, 100% of range
• Operating temperature -10°C to 55°C
• Storage temperature -20°C to 71°C
• Operating altitude: 3000 m
• Size : 130 x 236 x 61 mm
• Weight: 0.65 kg
• Batteries: 4 AA alkaline batteries
• To get full specifications of the device check the fluke 725 manual.