-
Testo 465 tachometer
$ 362.16
PCE FB 2TS Torque Meter
The PCE-FB 2TS torque wrench tester consists of a handheld measuring device and an external torque transducer. The twist converter is connected to the handset via a 1.5 m / 4.9 ft cable and thus allows installation on a test bench or direct mounting on the test bench.
The supplied torque measuring device has been adjusted so that test measurements can be started immediately.A calibration certificate is available as an option for the torque measuring device. This certificate is a target/actual comparison with a traceable reference standard and therefore serves as proof of measurement accuracy. The measurement uncertainty of the torque measuring device is only 0.5% of the measuring range. Therefore, the torque-measuring device is used as a reference device to test and adjust static torque measuring instruments. Screw locking is necessary for dynamic torque.
The torque sensor has a 1/2″ square socket and can perform torque measurements in both rotational directions. With a sampling frequency of 1600 Hz, the torque meter detects torque -The first and peak-peak torque (PEAK) moments (“click”) are displayed separately on the display and can be cleared manually or automatically after a specified time. Thanks to freely adjustable warning values, the torque measuring device can warn the tester about the torque overload tool. if not self-triggered.For a more detailed analysis of torque, the provided PC software can be used.
PCE-FB 2TS Features
- max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- keyed chuck up to Ø 13 mm
- MIN / MAX Dynamic Display (PEAK
- setpoint input with audible warning
- statistical analysis on the device
- Units: Nm / N-cm / kgf-m / gf-m / lbf-in
- multilingual: DE, GB, ES, IT
- incl. downloadable PC Software evaluation software
- USB and RS-232 interface
- Overload protection max. 50%
Specifications:
| Technical Specification | |
| PCE-FB 2TS | |
| Measuring range | 2 Nm (0,2 kgf-m) |
| Resolution | 0,001 Nm |
| Measurement uncertainty | ±0,5 % from the measuring range |
| Measuring units | Nm, Ncm, kgfm, lbfin, gfm |
| max. overload | 50 % of the measuring range |
| Tool intake | with sprocket / keyed chuck up to Ø 13 mm |
| Measuting rate | Freely adjustable up to 1.000 values / sec. 24 Bit Processor (16.000.000) |
| Measuring functions | PEAK Function (MIN – MAX Hold) / limit measurement / real-time measurement with Software |
| Display | LCD graphic Display 61 x 34 mm / automatic screen orientation / backlight |
| Menu guide | Multilingual: German / English / Spanish |
| Memory option | Internal memory and Mini SD memory card (the internal memory is limited to a measuring range of up to 6.400 measurements) |
| Storage | manual – by pressing a button automatic – (adjustable) |
| Interface | Serial RS-232, 9-pin and USB OPTIONAL: switching contact output MIN / MAX / OK (see below) + 1 input |
| Software | incl. downloadable PC Software for evaluation and control |
| Ambient conditions | – 10 … +40 °C |
| Power supply | 4x Ni-MH 2700 mAh AA batteries (replaceable) or via AC adapter ~230 V/12 V; 1,2 A incl. |
| auto OFF function | adjustable |
| Battery life | Approx. 20 Std. (without lighting approx. 45 Std.) |
| Dimensions evaluator | 210 x 110 x 40 mm / 600 g |
| Dimensions torque sensor | Ø 50 x 185 mm / 860 g |
| Cable length to the torque sensor | approx. 2 m |
Related products
Schutz Messtechnik GMS 4000 gas detector
Testo 380 Particle counter
Schutz Messtechnik GM 3100-SC-IR 100% CO2
Schutz Messtechnik GM 3100-SC-IR 100% O2
We are always at your doorstep with your favorite products
Contact Info
- Address: Alsabkha Bus Station, Deira, Dubai, UAE
- Phone: +971 56 583 2198
- Email: info@soonmart.com
